Stove, Range & Oven Repair
in Poulsbo, WA
An oven that will not heat or a burner that will not light gets attention the same day in Poulsbo when you call early. Bremerton Rabbit Appliance repairs electric and gas stoves, ranges and ovens here 7 days a week.
Poulsbo is the farthest regular stop from our shop in East Bremerton, so our oven and range calls here are planned onto a north-end route rather than squeezed in between Bremerton jobs. That planning works in your favor. Call before early afternoon and a technician is usually at your door the same day, whether you are on Front Street, up in the Olhava plats or out past Keyport. Call later and you get the first slot the next morning, and we run that route on Saturdays and Sundays exactly as we do during the week. Nobody has to live without a working oven over a weekend.
The ranges themselves span four decades. In the 1960s and 70s houses along Liberty Bay and up the hill, we still find coil-top Hotpoint, GE and Kenmore electric ranges with mechanical thermostats and bake elements that have been replaced once already. In the newer subdivisions it is glass-top and induction Samsung, LG, Frigidaire and KitchenAid ranges, plus gas ranges where the builder ran a line. Those have electronic controls, temperature sensors and igniters that fail in their own way, and the diagnosis needs a meter rather than a guess.
A Poulsbo oven call runs like this. The technician checks the bake and broil elements or igniters, the temperature sensor or thermostat, the control board and its relays, the door switch and latch, and the surface burners. For gas ranges we check the igniters, the spark module and the oven safety valve, but not the gas piping to the house. You get a written finding and one written price before any part is replaced. Most range repairs finish that day with parts from the van.

Common Oven & Range Problems in Poulsbo
Uneven baking in an electric oven usually means the broil element has quit so the bake element does all the work, or the temperature sensor is reading low and the control overshoots. On older coil-top ranges with a mechanical thermostat, the thermostat itself drifts. We measure the actual oven temperature against the setting and replace the part that is lying to you.
Continuous clicking with no flame means the spark is firing but the gas is not reaching the burner or the igniter is sparking in the wrong place. A burner cap that is wet or out of position after cleaning is the most common cause. If it is not that, it is the igniter or the spark module. We clean, reseat and test before replacing anything.
A bake element with a visible break, a failed igniter on a gas oven that glows but never opens the valve, or a sensor reading wrong will all leave the oven stuck at a low temperature. On the newer Olhava-area ranges the control board relay can also fail. We check each with a meter so you are not paying for a board when it is an element.
Radiant elements under a glass top fail individually, and so do the switches that feed them. A burner that is dead while the others work is one or the other. On induction ranges the problem is more likely a failed coil driver or a cookware detection fault. Identifying which is a meter job, and the common elements and switches are stocked on the van.
A sagging door on an older range is usually worn hinges or a broken spring. On a newer range, a door that will not lock for self-clean or that the control thinks is open is a latch motor or a door switch. Either way the oven loses heat and the control may refuse to run. We replace the hinge, spring, latch or switch and realign the door.
On the Job Across Kitsap
Meters first, opinions second. The crew doing what a visit actually pays for: measured diagnosis at the machine.
What's different about oven and range repair in Poulsbo
The spread of equipment. In one day on the Poulsbo route a technician can go from a coil-top Hotpoint in a Front Street kitchen last remodeled in the 1970s to an induction range in a new build near College Marketplace. Our vans carry parts for both ends of that spread, which is how most repairs finish on the first visit this far from the shop. Moisture plays a role too: in waterfront kitchens we find corrosion on element terminals and spark module connections that would not happen inland, so we check those near Liberty Bay. And because Poulsbo is a planned route, an early call is the key to same-day service, every day of the week.
Oven & Range Repair in Poulsbo: Asked Often
Do you work on gas ranges in Poulsbo, or only electric?
Both. We repair the gas range itself: igniters, spark modules, burner valves, the oven safety valve and the controls. We do not run or repair gas piping to the house or the shutoff, so if the fault is on the supply side we tell you and stop. Electric ranges, from coil-top to induction, are the bulk of what we see here.
My oven is original to a 1970s house downtown. Should I fix it or replace it?
Fix it, in many cases. Those older electric ranges are simple and the parts that fail, elements, thermostats, switches, are still available. The technician will give you a written finding and one written price, and you decide. We do not push replacement. If a part is truly gone we will say so rather than string you along.
The self-clean cycle ran and now the oven is dead. What happened?
Self-clean runs the oven hotter than anything else and that heat often takes out a thermal fuse or a control board relay that was already weak, or jams the door lock so the control will not start. It is a very common call. We check the fuse, the lock and the board and get you back in business, usually from van stock.
Can you come after the Bainbridge ferry gets in?
Our last appointments run toward 7:00 PM, and we hold evening and weekend slots for Poulsbo commuters who ride the ferry. Tell us when you call and we will set a window that works. Weekend mornings are often the easiest for a longer range repair where the oven has to come out of the cabinet.
Do you repair cooktops and wall ovens separately?
Yes. Separate cooktops and wall ovens are common in the newer homes around Olhava and in remodeled kitchens downtown. We service both, including electric, gas and induction cooktops and single and double wall ovens. Let us know the setup when you call so the technician plans for it and brings the right parts.
Other Machines We Repair in Poulsbo
Dryer Repair in Poulsbo
Poulsbo dryers fight the dampest winters on our map. Long vent runs through crawl spaces in the hillside houses collect wet lint, and the symptom is a dryer that runs long, runs hot or stops heating. We test the element, thermostats, thermal fuse and airflow, and fix most dryers on the first visit from van stock.
Washer Repair in Poulsbo
Front-loaders near Liberty Bay are prone to mold in the door boot and a sour smell that will not wash out. Top-loaders in the older houses lose lid switches, drain pumps and suspension rods. We diagnose leaks, noise, error codes and no-spin faults anywhere in Poulsbo seven days a week.
Refrigerator & Freezer Repair in Poulsbo
A refrigerator in a damp Poulsbo kitchen works harder than one inland, and condensation hides problems until water shows up on the floor. We handle warm fridges, frozen-over freezers, failed defrost systems, noisy fans and compressors that start and stop, on every major brand from Front Street to Olhava.
Ice Maker Repair in Poulsbo
Ice makers quit quietly, and in Poulsbo the usual reasons are a frozen fill tube, a failed inlet valve, a mold that stopped cycling or a water line that was disturbed when the refrigerator was moved during a remodel. We test the water supply and the ice maker assembly and tell you which one is the problem.
Dishwasher Repair in Poulsbo
From the built-in Bosch units in the Olhava subdivisions to the older Kenmore and Whirlpool dishwashers downtown, we repair drain failures, no-fill faults, cloudy dishes, leaks at the door and control panels that will not respond. Poulsbo calls are scheduled 7 days a week with same-day openings when you call early.
Read Next
Gas Range Burner Won't Light: What Kitsap Homeowners Can Check
A gas burner that clicks without lighting is usually wet, dirty, or reassembled crooked. This guide covers the safe checks, the spark module and switches, propane versus natural gas around Poulsbo and the north end, and the gas-safety lines no homeowner should cross.
Read the guide →Oven Not Heating in Bremerton: What to Check Before You Call
An oven that lights up but never gets hot usually comes down to the bake element, a weak gas igniter, the temperature sensor, or a fuse tripped by self-clean. Here is how Bremerton homeowners can narrow it down without tools, and where it becomes a meter job.
Read the guide →Oven Temperature Running Hot or Cold: A Kitsap Troubleshooting Guide
Burnt bottoms and underdone centers often trace back to oven temperature. Learn how an oven cycles, how to run a thermometer test, when the calibration offset is the right fix, and when a drifting sensor, convection fan, or leaking door gasket means a Port Orchard service call.
Read the guide →The McCormick Woods Wall Oven Locked After Self-Clean
A built-in electric wall oven in a McCormick Woods home ran self-clean the evening before a dinner, then refused to unlock or heat. The latch motor had stalled and the thermal fuse behind the control had opened from the heat.
Read the case →The Poulsbo Dishwasher That Would Not Drain on a Sunday
A dishwasher above Liberty Bay held an inch of dirty water on a Sunday morning with company due that evening. A same-day weekend visit found broken glass packed into the sump and a drain hose lying flat under the sink.
Read the case →Oven & Range down in Poulsbo?
For stove, range and oven repair in Poulsbo, call (360) 717-8985 any day of the week, and use code HOP20 for $20 OFF a completed repair.






