Stove, Range & Oven Repair
in Silverdale, WA

Oven not heating, a burner stuck on high or a code on the panel? Rabbit Appliance repairs stoves, ranges and ovens in Silverdale 7 days a week, with same-day visits when you call early.

✓ Open 7 days a week — Silverdale is on every day's route✓ Same-day visits when you call early✓ One written price after diagnosis, approved by you

Get a Visit on the Books

Tell us what the machine is doing. We call back with a window and get you on today's route when the clock allows.

$20 OFF code HOP20 rides along with this request — it comes off any completed repair.

We diagnose first, then hand you one written price. Nothing is installed until you approve it.

7 days a week, 8 AM – 7 PM• Same-day visits when you call early• Written price after diagnosis, approved by you• Warranty on parts and labor, on the invoice

A Sunday afternoon call about an oven that will not heat is a familiar one from Silverdale, and we take it like any other day of the week. If the call comes before early afternoon, the van is usually in your driveway that day; later, you get the first opening the next morning. Oven calls pick up around holidays and on the weekends when Navy families near Bangor finally have everyone home for dinner, and a dead bake element or a range that locks itself with an F-code is not something anyone wants to discover with a roast on the counter. We plan our weekends for it.

The ranges in Silverdale's newer homes are mostly electric: smooth-top radiant or induction cooktops with convection ovens below and a touch control panel on top. A few of the newer plats have gas ranges, and Old Town has some older coil-top electrics that still work fine. The electric ovens fail at the bake element, the broil element, the temperature sensor or the control board. Induction cooktops add a power board and a set of coils that can drop out one burner at a time. Gas ranges bring igniters, spark modules and oven safety valves. We carry the common parts for all three.

The visit itself is simple. The technician confirms the symptom, tests the element, sensor or igniter with a meter, writes the finding and gives you one written price before installing anything. Most range repairs finish in one visit from the van. One boundary worth knowing: we repair the appliance, not the house. If a breaker is tripping, the 240-volt outlet is damaged or the gas line to the range is suspect, we will say so and point you to an electrician or gas fitter. We do not do house wiring or gas piping, and we hand microwaves off as well.

Range and oven control panel being checked during a service call
Oven controls going through their paces — locked panels after self-clean are a regular call.
What we hear from Silverdale

Common Oven & Range Problems in Silverdale

Oven heats slowly or never reaches temperature

A bake element that has broken in one spot will glow partly or not at all, and the oven stalls well below the set temperature. On convection ovens a failed convection fan or a drifting temperature sensor does the same thing. We measure the element's resistance and the sensor's reading at room temperature, then replace the one that is out of spec.

Control panel shows an F-code and locks up

F-codes on electric ranges usually name the temperature sensor, the door lock, a stuck key on the membrane or the control board itself. Unplugging the range for a minute sometimes clears it; if it returns, the fault is real. We test the sensor and the lock before considering a board, and on a young range we check whether the maker should cover it.

One cooktop burner stays on high or will not come on

On a radiant smooth-top this is a burner switch or the element; on an induction top it is a coil, a power board or the pan sensing. A burner stuck on high is a switch fault and a safety issue, so turn the breaker off and call. We carry switches and elements for the common Whirlpool, GE and Frigidaire tops.

Gas burner clicks but will not light

The spark module is working but the burner is not catching, which points to a wet or cracked igniter, a clogged burner port or weak gas flow at that burner. If every burner clicks and none light, we look at the supply. Our technicians service the burners, igniters and valves on the range; the house gas line belongs to a gas fitter.

Oven door will not open after self-clean

The door lock motor or latch switch engaged for the clean cycle and did not release when the oven cooled. Forcing the door breaks the latch. We release it, then test the lock motor, the switch and the temperature sensor that tells the control it is safe to unlock. It is a routine repair on the convection ranges common in Ridgetop and Island Lake.

From the routes

On the Job Across Kitsap

Meters first, opinions second. The crew doing what a visit actually pays for: measured diagnosis at the machine.

Range and oven control panel being checked during a service call
Oven controls going through their paces — locked panels after self-clean are a regular call.
Technician testing a French-door refrigerator with a multimeter
Refrigerator call — readings before any part gets named.
Technician metering an electric dryer in a garage laundry area
Garage-laundry dryer, meter on the heater circuit.
Spray arm and filter area inside a built-in dishwasher
Inside a built-in dishwasher — spray arm off, filter out, checking what the owner never sees.
Front-load dryer on a pedestal next to the matching washer
Pedestal laundry pair waiting its turn — tight quarters, standard work.
Open built-in dishwasher with racks visible during a door and latch inspection
Door, latch and rack inspection on a kitchen built-in.
Dishwasher control panel showing a diagnostic readout
Panel readout mid-diagnostic — the machine tells its side of the story.
Stainless dishwasher in a kitchen before service
A kitchen stop — stainless front, wood floor, dog supervising off-frame.
Local angle

What's different about oven and range repair in Silverdale

Silverdale ranges are newer and more electronic than most of the county, so the faults are different. A membrane keypad, a relay board or an induction power board is a more likely finding than a burnt wire on a coil top. Diagnosis is done with a meter, not by swapping parts. Warranty comes up constantly, because a range bought on the Silverdale Way corridor three years ago may still carry coverage on a board, and we check before we quote. The housing matters too: a slide-in range in a tight townhome cutout takes care to pull and reinstall without scratching the quartz. Finally, there are more gas ranges in the newer plats than people expect, and we service those too.

How a Silverdale visit runs: you call or send the form; we come back with a window (today, when the clock allows). At the machine we measure before we name a part, write down the finding, and give you one price. You approve it, then we fix it — usually in the same visit from van stock. Parts and labor are warrantied on the invoice.
Fair questions

Oven & Range Repair in Silverdale: Asked Often

The oven light and clock work but the oven will not heat. What is that?

Power is reaching the range, so the fault is downstream: most often the bake element, the oven temperature sensor or a relay on the control board that switches the element on. Our technician measures each with a meter. On an electric range it can also be one lost leg of the 240-volt supply, which looks like a working clock and a dead oven.

Do you service induction cooktops in Silverdale?

Yes. Induction tops are common in the newer kitchens around Ridgetop and Island Lake, and we service the coils, the power boards, the fans and the touch controls. A single burner that drops out or a top that beeps and refuses pans is a typical call. We also tell you when a pan is the problem rather than the cooktop.

Is a gas range repair something you do, or do I need a plumber?

We repair the range: igniters, spark modules, burner valves, the oven safety valve and the oven igniter. We do not run or repair gas piping in the house. If the technician suspects the supply line, the shutoff or the pressure, we stop there and you will need a gas fitter. We say so in the written finding.

Can I still use the cooktop if the oven is dead?

On most electric ranges, yes, the cooktop and oven run on separate circuits inside the appliance. If there is a burning smell, a tripped breaker or a burner that will not turn off, leave the range off at the breaker until we arrive. Call before early afternoon and we can usually be there the same day, any day of the week.

Our slide-in range has to come out to be serviced. Will you scratch the counter?

We take care with it. Slide-in and front-control ranges in Silverdale townhomes often sit in a tight cutout, and the technician protects the counter edges and the floor before pulling the unit. It goes back level with the anti-tip bracket engaged. If you know the range is heavy or the cutout is tight, mention it when you call.

Also in Silverdale

Other Machines We Repair in Silverdale

Dryer Repair in Silverdale

Silverdale dryers are often stacked above the washer in a hallway closet, with a short vent run to an exterior wall. That setup heats up fast when lint builds, so thermal fuses and cycling thermostats are regular finds. We also handle moisture sensors, heating elements and drum rollers on the Samsung, LG and Whirlpool units common in Ridgetop and Island Lake.

Washer Repair in Silverdale

Front-load washers rule in Silverdale's newer homes, and their complaints come as error codes: a drain fault, a door lock fault, an unbalanced load that will not spin out. Our technicians read the code, confirm it with the meter, and replace the pump, lock, sensor or board that is actually at fault. Top-loaders in Old Town get the same care.

Refrigerator & Freezer Repair in Silverdale

French door and side-by-side refrigerators from Samsung, LG, Whirlpool and GE fill Silverdale kitchens, and when they fail it is usually the fridge side warming while the freezer stays cold, or a water and ice problem. We test the evaporator fan, the defrost circuit, the damper and the compressor start relay on site and carry the common parts in the van.

Ice Maker Repair in Silverdale

Ice makers in Silverdale tend to live inside French door refrigerators, which means a frozen fill tube, a failed ice maker module or a dead water valve rather than a standalone unit. We also service the under-counter ice machines showing up in finished basements and bar areas around Island Lake. Most ice maker repairs finish in one visit from van stock.

Dishwasher Repair in Silverdale

Newer Silverdale dishwashers are quiet, electronic and picky about drainage and water flow. Dishes left wet, water in the bottom after the cycle, a blinking light that will not clear and a door that pops open are the calls we hear. We replace drain pumps, float switches, inlet valves, heating elements and control boards, and we check the air gap and drain loop while we are under the sink.

Stove, Range & Oven Repair elsewhere on the map: Bremerton · Port Orchard · Poulsbo · Tracyton · Manchester · all of Kitsap
From the notebook

Read Next

 Troubleshooting · 6 min read

Oven Not Heating in Bremerton: What to Check Before You Call

An oven that lights up but never gets hot usually comes down to the bake element, a weak gas igniter, the temperature sensor, or a fuse tripped by self-clean. Here is how Bremerton homeowners can narrow it down without tools, and where it becomes a meter job.

Read the guide →
 Troubleshooting · 6 min read

Gas Range Burner Won't Light: What Kitsap Homeowners Can Check

A gas burner that clicks without lighting is usually wet, dirty, or reassembled crooked. This guide covers the safe checks, the spark module and switches, propane versus natural gas around Poulsbo and the north end, and the gas-safety lines no homeowner should cross.

Read the guide →
 Troubleshooting · 6 min read

Oven Temperature Running Hot or Cold: A Kitsap Troubleshooting Guide

Burnt bottoms and underdone centers often trace back to oven temperature. Learn how an oven cycles, how to run a thermometer test, when the calibration offset is the right fix, and when a drifting sensor, convection fan, or leaking door gasket means a Port Orchard service call.

Read the guide →
 McCormick Woods, Port Orchard

The McCormick Woods Wall Oven Locked After Self-Clean

A built-in electric wall oven in a McCormick Woods home ran self-clean the evening before a dinner, then refused to unlock or heat. The latch motor had stalled and the thermal fuse behind the control had opened from the heat.

Read the case →
 Ridgetop, Silverdale

The Ridgetop Front-Loader Full of Standing Water

A front-load washer in a Ridgetop townhome quit mid-cycle with six inches of water in the drum and the door locked. A morning call became a same-day visit, a manual drain, a sock pulled from the pump, and a decision about a wobbling pump.

Read the case →

Oven & Range down in Silverdale?

Oven, range or cooktop trouble in Silverdale? Call (360) 717-8985 for a visit 7 days a week, often the same day when you call early.