Stove, Range & Oven Repair
in Bremerton, WA

Oven not heating or a burner out in Bremerton? Rabbit Appliance repairs electric and gas ranges across the city, 7 days a week, with same-day visits when you call before early afternoon.

✓ Open 7 days a week — Bremerton is on every day's route✓ Same-day visits when you call early✓ One written price after diagnosis, approved by you

Get a Visit on the Books

Tell us what the machine is doing. We call back with a window and get you on today's route when the clock allows.

$20 OFF code HOP20 rides along with this request — it comes off any completed repair.

We diagnose first, then hand you one written price. Nothing is installed until you approve it.

7 days a week, 8 AM – 7 PM• Same-day visits when you call early• Written price after diagnosis, approved by you• Warranty on parts and labor, on the invoice

The call usually goes like this: the oven took forever to preheat, the beep finally came, and dinner still came out underdone. Or one burner on the glass top stopped working the week a houseful of family arrived. Range calls in Bremerton cluster around the holidays and around move-in weeks, and they come from every kind of kitchen in town, from the original electric ranges in 1950s ramblers along Wheaton Way to gas ranges in newer houses in Rolling Hills and the townhomes near the waterfront.

Electric ranges dominate Bremerton. The wartime houses and mid-century ramblers were wired for electric cooking, and many still have coil-top ranges that have been repaired more than once. Rentals in Union Hill, Haddon and around Olympic College usually have a basic electric range from Frigidaire, GE, Whirlpool or Hotpoint. Glass-top and convection ranges from Samsung, LG and KitchenAid show up in remodeled kitchens and newer builds, along with gas ranges where the house has a gas line. We repair all of those, and we work on both gas and electric units.

A range visit begins with the technician confirming what the oven and each burner actually do, then testing with a meter: bake and broil elements, surface elements and their switches, the temperature sensor, the igniter and gas valve on a gas range, the door lock and the control board. The finding and one written price come before any part is installed. Elements, sensors, igniters and switches for the common brands ride on the van, so most Bremerton range repairs are done in one visit. We do not work on the house wiring or the gas piping, and we say so plainly when the fault is there.

Range and oven control panel being checked during a service call
Oven controls going through their paces — locked panels after self-clean are a regular call.
What we hear from Bremerton

Common Oven & Range Problems in Bremerton

Preheat beeps late and food still comes out raw

An oven that takes a long time to preheat and then bakes unevenly often has a weak bake element, a temperature sensor reading low, or a control that has drifted. On older coil-top ranges in Bremerton ramblers the element can glow in patches and still fail to deliver full heat. We test the element and sensor with a meter, check the actual oven temperature, and replace the part that is out of range.

Only one burner on the glass top works

On a glass-top range, a dead burner is usually a failed radiant element or the switch that controls it, and occasionally the wiring harness connection behind the cooktop has burned. When several burners fail at once, the control board or a power issue to the range is more likely. We check each burner circuit, confirm the supply, and tell you whether the fault is in the range or in the house wiring.

Gas burner clicks and clicks before it lights

A burner that sparks for a long time before catching, or sparks constantly even when off, usually has a dirty or cracked igniter electrode, a wet spark module after a boil-over, or a burner cap that is not seated. Gas ranges are less common in Bremerton but we see them in newer Illahee and Rolling Hills kitchens. We clean, test and replace the igniter or module as needed. The gas line itself is not something we work on.

Oven door will not unlock after self-clean

Self-clean cycles run hot, and after one the door lock motor or the thermal fuse that protects the control can fail, leaving the door locked with the oven cold. On some ranges the control board loses the lock signal. We release the door, test the lock assembly and fuse, and replace what failed. This is a common call in Bremerton the week after a deep kitchen clean before guests arrive.

Error code on the display and the whole range is dead

A code on the display with no heat anywhere points to the control board, the temperature sensor, the door lock circuit or a power problem. Older houses near the shipyard sometimes have a range circuit that drops one leg, which leaves the clock lit and the elements dead. We read the code, test the sensor and board, confirm the supply voltage at the range, and tell you whether the fix is in the appliance or needs an electrician.

From the routes

On the Job Across Kitsap

Meters first, opinions second. The crew doing what a visit actually pays for: measured diagnosis at the machine.

Range and oven control panel being checked during a service call
Oven controls going through their paces — locked panels after self-clean are a regular call.
Technician testing a French-door refrigerator with a multimeter
Refrigerator call — readings before any part gets named.
Technician metering an electric dryer in a garage laundry area
Garage-laundry dryer, meter on the heater circuit.
Spray arm and filter area inside a built-in dishwasher
Inside a built-in dishwasher — spray arm off, filter out, checking what the owner never sees.
Front-load dryer on a pedestal next to the matching washer
Pedestal laundry pair waiting its turn — tight quarters, standard work.
Open built-in dishwasher with racks visible during a door and latch inspection
Door, latch and rack inspection on a kitchen built-in.
Dishwasher control panel showing a diagnostic readout
Panel readout mid-diagnostic — the machine tells its side of the story.
Stainless dishwasher in a kitchen before service
A kitchen stop — stainless front, wood floor, dog supervising off-frame.
Local angle

What's different about range and oven repair in Bremerton

Bremerton kitchens were built around electric cooking, and the range circuit in a 1940s or 1950s house has often been through several panel changes and a few amateur repairs. A fair share of our range calls near the shipyard and in West Bremerton end with the technician explaining that the range is fine and the problem is upstream, which we tell you rather than selling a part that will not fix anything. Rental turnover adds its own pattern: ranges in Union Hill and Haddon rentals get cleaned hard between tenants, and control panels, door gaskets and locks suffer. And every November the calls come in a wave, because the oven that was slow all year finally matters.

How a Bremerton visit runs: you call or send the form; we come back with a window (today, when the clock allows). At the machine we measure before we name a part, write down the finding, and give you one price. You approve it, then we fix it — usually in the same visit from van stock. Parts and labor are warrantied on the invoice.
Fair questions

Oven & Range Repair in Bremerton: Asked Often

Our East Bremerton kitchen still has the original range from the 1950s or 60s. Do you work on those?

Yes, as long as parts can be found, and for many older electric ranges they still can. Elements, switches and thermostats for the older Frigidaire, GE, Hotpoint and Kenmore ranges are often available. The technician will diagnose the fault first and tell you plainly if a part is no longer made before you spend anything. Some of those ranges will outlast the house, and keeping one going is often a sensible repair.

The oven light and clock work but there is no heat at all. Is it the breaker?

Possibly. An electric range uses two legs of power, and if one leg drops, the clock and light keep working on the other while the elements go dead. Check the breaker first, and if it has tripped, reset it once. If the problem comes back, or the breaker is fine, call us. The technician will confirm the supply at the range, then test the elements and control to find the actual fault.

Do you repair gas ranges in Bremerton, or only electric?

Both. Gas ranges are less common in Bremerton than electric, but we see them in newer houses in Rolling Hills and Illahee and in some remodeled kitchens. We work on igniters, spark modules, gas valves, oven igniters and the controls. We do not work on the gas piping or the shutoff valve behind the range, and if the problem is in the supply we will say so and point you to a gas fitter.

Can you get here before a holiday dinner?

The sooner you call, the better. Range calls in Bremerton pile up in the days before Thanksgiving and Christmas, and we work every day including weekends to get through them. A call early in the week before a holiday usually gets a visit the same day or the next morning. If an oven has been slow or uneven for months, do not wait for the week of the dinner to call about it.

I rent. Can you fix the range without the landlord there?

Yes, if the landlord or property manager has approved the repair. Many Bremerton landlords let the tenant schedule and be present while they handle the approval and payment by phone. The written finding and the written price go to whoever is paying, and nothing is installed until that person says yes. Just tell us who to send the finding to when you book the visit.

Also in Bremerton

Other Machines We Repair in Bremerton

Dryer Repair in Bremerton

Bremerton dryer calls usually start with cycles that keep getting longer. Long vent runs through crawl spaces and damp basements fill with lint faster than owners expect, and the dryer suffers for it. We check airflow first, then test the element, thermostats and fuse with a meter, and carry the common parts for Whirlpool, Kenmore, Maytag, LG and Samsung on the van.

Washer Repair in Bremerton

Garage and basement laundries across Bremerton put washers on cold, uneven concrete, and the machines show it: walking on spin, standing water, sour front-loaders, lid locks that give up. We repair top-load and front-load washers from every major brand, including the Speed Queens that arrive with Navy transfers, and test the drain pump, valves and control before anything is replaced.

Refrigerator & Freezer Repair in Bremerton

A refrigerator that stops cooling is the one call we try hardest to fit in the same day, because food in a Bremerton kitchen does not wait. We work on top-freezer rentals in Union Hill, French-door units in Illahee, and the second fridge in the garage in Sheridan Park, and we see a lot of units that stopped cooling the week after a move.

Ice Maker Repair in Bremerton

Ice makers in Bremerton quit for a short list of reasons: a frozen fill tube, a stuck valve, a worn module, a fridge that was moved and never leveled again. We repair the ice maker in your refrigerator or freezer, whatever the brand, and the built-in undercounter units in a few waterfront kitchens, and we explain what is worth fixing and what is not.

Dishwasher Repair in Bremerton

Dishwashers in Bremerton were often added to kitchens that were never built for one, so leaks, wobbles and poor draining are common. We repair pumps, valves, latches, spray arms and controls on Whirlpool, KitchenAid, Bosch, GE, Frigidaire and the rest, and we check the connections under the sink before we blame the machine.

Stove, Range & Oven Repair elsewhere on the map: Silverdale · Port Orchard · Poulsbo · Tracyton · Manchester · all of Kitsap
From the notebook

Read Next

 Troubleshooting · 6 min read

Oven Not Heating in Bremerton: What to Check Before You Call

An oven that lights up but never gets hot usually comes down to the bake element, a weak gas igniter, the temperature sensor, or a fuse tripped by self-clean. Here is how Bremerton homeowners can narrow it down without tools, and where it becomes a meter job.

Read the guide →
 Troubleshooting · 6 min read

Gas Range Burner Won't Light: What Kitsap Homeowners Can Check

A gas burner that clicks without lighting is usually wet, dirty, or reassembled crooked. This guide covers the safe checks, the spark module and switches, propane versus natural gas around Poulsbo and the north end, and the gas-safety lines no homeowner should cross.

Read the guide →
 Troubleshooting · 6 min read

Oven Temperature Running Hot or Cold: A Kitsap Troubleshooting Guide

Burnt bottoms and underdone centers often trace back to oven temperature. Learn how an oven cycles, how to run a thermometer test, when the calibration offset is the right fix, and when a drifting sensor, convection fan, or leaking door gasket means a Port Orchard service call.

Read the guide →
 McCormick Woods, Port Orchard

The McCormick Woods Wall Oven Locked After Self-Clean

A built-in electric wall oven in a McCormick Woods home ran self-clean the evening before a dinner, then refused to unlock or heat. The latch motor had stalled and the thermal fuse behind the control had opened from the heat.

Read the case →
 Manette

The Manette Dryer That Heated Just Fine

An electric dryer in a 1940s Manette house took three cycles to dry a load. The element checked good, yet the drum air stayed lukewarm. A long crawl-space vent and a scorched plug explained what the meter could not.

Read the case →

Oven & Range down in Bremerton?

For stove, range and oven repair in Bremerton, electric or gas, call Rabbit Appliance at (360) 717-8985. Open 7 days a week, based on Ivy Rd.