Appliance Repair
in Kitsap County, WA

We repair dryers, washers, refrigerators and freezers, stoves and ovens, ice makers, and dishwashers in Bremerton and five nearby towns, seven days a week, 8 AM to 7 PM. Call before early afternoon and you will usually see us the same day. One written price after the diagnosis, approved by you before work starts.

✓ One written price after diagnosis, approved before work starts✓ Open every day of the week, Sunday included✓ Parts and labor warranty printed on your invoice

Get a Visit on the Books

Tell us what the machine is doing. We call back with a window and get you on today's route when the clock allows.

$20 OFF code HOP20 rides along with this request — it comes off any completed repair.

We diagnose first, then hand you one written price. Nothing is installed until you approve it.

7 days a week, 8 AM – 7 PM•Same-day visits when you call early•Written price after diagnosis, approved by you•Warranty on parts and labor, on the invoice
Our work

On the Job Across Kitsap

Meters first, opinions second. The crew doing what a visit actually pays for: measured diagnosis at the machine.

Range and oven control panel being checked during a service call
Oven controls going through their paces — locked panels after self-clean are a regular call.
Front-load dryer on a pedestal next to the matching washer
Pedestal laundry pair waiting its turn — tight quarters, standard work.
Open built-in dishwasher with racks visible during a door and latch inspection
Door, latch and rack inspection on a kitchen built-in.
Spray arm and filter area inside a built-in dishwasher
Inside a built-in dishwasher — spray arm off, filter out, checking what the owner never sees.
Technician testing a French-door refrigerator with a multimeter
Refrigerator call — readings before any part gets named.
Technician metering an electric dryer in a garage laundry area
Garage-laundry dryer, meter on the heater circuit.
Dishwasher control panel showing a diagnostic readout
Panel readout mid-diagnostic — the machine tells its side of the story.
Stainless dishwasher in a kitchen before service
A kitchen stop — stainless front, wood floor, dog supervising off-frame.
What we fix

Six Machines, One Clear Process

Most booked

Dryer Repair

No heat, long cycles, a thump on every turn, or a cabinet that smells hot. Gas and electric dryers, most fixed in one visit from van stock.

See how we run it →

Washer Repair

Will not drain, will not spin, leaks at the floor, or walks across the laundry room. Top-load, front-load, and stacked washers, every major brand.

See how we run it →

Refrigerator & Freezer Repair

Warm fridge, frosted freezer, water on the floor, or a compressor that never stops. Side-by-side, French door, top freezer, garage units, chest freezers.

See how we run it →

Stove, Range & Oven Repair

Oven will not heat, burner will not light, temperature drifts, or the panel shows a code. Electric and gas ranges, wall ovens, and cooktops.

See how we run it →

Ice Maker Repair

Not making ice, hollow cubes, ice that tastes off, or a bin that fills once and stops. Built-in and fridge-mounted ice makers, all major brands.

See how we run it →

Dishwasher Repair

Dishes come out dirty, water sits in the bottom, the door leaks, or the cycle never finishes. Built-in dishwashers of every major brand.

See how we run it →
$20 OFFANY COMPLETED REPAIR
Code HOP20 — say it on the phone or let the form carry it for you.

Comes off the completed repair. One per visit; doesn't stack with other offers. No expiration games, it's just the standing deal, seven days a week.

Claim It — (360) 717-8985
The short version

How a Rabbit Visit Runs

STEP 01

You call

Call (360) 717-8985 any day of the week between 8 AM and 7 PM, or send the short form. Tell us the machine, the brand, and what it is doing. Call before early afternoon and we can usually come out the same day. Later calls get the first opening next morning.

STEP 02

We measure

Our technician arrives, listens to your description, and puts a meter on the machine before anyone guesses. Elements, motors, pumps, sensors, and boards get tested, not assumed. The finding is written down in plain words so you can see what failed and why.

STEP 03

You approve the price

After the diagnosis you get one written price for the complete repair, parts and labor together. You read it, ask what you want, and approve it before a single part is installed. No work starts on a nod or a maybe. If you decide not to proceed, that is your call.

STEP 04

We fix it

Most repairs finish in that same visit from the parts carried on the van. If a part has to be ordered, we schedule the return visit before leaving. The invoice shows the work done and the parts-and-labor warranty terms. Mention code HOP20 for $20 OFF a completed repair.

Where we hop

Six Towns Off One Bremerton Base

Bremerton

ZIP 98310 · 98311 · 98312

Our home base. Manette, East Bremerton, West Bremerton, Kitsap Lake, Jackson Park, and the hills between them, often the same morning you call.

Silverdale

ZIP 98383

Ridgetop, Island Lake, Clear Creek, and Old Town on Dyes Inlet, fifteen minutes up Highway 303 from the shop.

Port Orchard

ZIP 98366 · 98367

Across Sinclair Inlet to Bay Street, Bethel Avenue, Sedgwick Road, McCormick Woods, Sunnyslope, Annapolis, and Long Lake.

Poulsbo

ZIP 98370

Front Street, the Olhava area, Lemolo, Keyport, and Scandia, north on Highway 3 to Liberty Bay.

Tracyton

ZIP 98393

Ten minutes from the shop along Tracyton Beach Road and Bucklin Hill, waterfront houses and big-lot ramblers.

Manchester

ZIP 98353

Colchester Drive, Beach Drive, and the rural lots around Manchester State Park, on planned routes from Bremerton.

Why the rabbit

Fast Feet, Steady Hands, No Surprises

Our service map is small on purpose. From Ivy Road in East Bremerton, every town we serve sits on a compact route: Silverdale and Tracyton up Highway 303, Port Orchard across Sinclair Inlet, Poulsbo north on Highway 3, Manchester out along the Sound. Compact routes mean the technician spends the day in kitchens and laundry rooms instead of on the highway. That is how same-day visits stay realistic for calls that come in before early afternoon, and how the schedule holds when a job runs long.

A dryer that spins cold can be a heating element, a thermal fuse, a bad thermostat, or a vent packed with lint. Those are different repairs, and nobody can tell which one it is from a phone call. So we measure first. The technician tests the parts in question with a meter, writes the finding down, and only then puts a price on paper. You approve that price before anything is installed. Diagnosis, then price, then work, never the other way around, at every address on the map.

Appliances fail on Saturday morning as readily as on Tuesday. A refrigerator going warm on a Sunday does not wait, and a family with a full laundry basket does not care what day it is. So we are open seven days a week, 8 AM to 7 PM, the same hours every day. Weekend visits run on the same written-price process as any other visit, with the same technicians and the same van stock. Nothing about the work changes except the date on the invoice.

More about how we work →

Brands on the bench every week

WhirlpoolMaytagKenmoreSamsungLGGESpeed QueenAmanaRoperElectroluxFrigidaireKitchenAidBoschHotpoint
Open seven days a week, 8 AM to 7 PM. Call before early afternoon and a same-day visit is usually on the board; later calls get the first opening tomorrow morning. Book a visit →
Case notes

How Typical Repairs Play Out

Walk-throughs of typical calls across the six towns: what the owner noticed, what the meter showed, what was written down, and how it ended. Composite cases, no names, no addresses.

 Tracyton

The Tracyton In-Door Ice Maker That Went Quiet

An in-door ice maker on a French-door refrigerator in a Tracyton waterfront house simply stopped, no noise and no puddle. The fill tube had frozen solid because the inlet valve passed only a trickle, and the trickle froze before it reached the mold.

Read the case →
 Ridgetop, Silverdale

The Ridgetop Front-Loader Full of Standing Water

A front-load washer in a Ridgetop townhome quit mid-cycle with six inches of water in the drum and the door locked. A morning call became a same-day visit, a manual drain, a sock pulled from the pump, and a decision about a wobbling pump.

Read the case →
 Liberty Bay, Poulsbo

The Poulsbo Dishwasher That Would Not Drain on a Sunday

A dishwasher above Liberty Bay held an inch of dirty water on a Sunday morning with company due that evening. A same-day weekend visit found broken glass packed into the sump and a drain hose lying flat under the sink.

Read the case →

All case notes →

From the blog

Appliance Notes for Kitsap Homes

 Troubleshooting · 5 min read

Refrigerator Clicking, Buzzing or Humming: What Each Noise Means

Refrigerators make a surprising range of sounds, and most are harmless. A few are early warnings. This guide for Tracyton and Bremerton homes sorts the relay click, the fan rub, the compressor hum and the ice maker fill into normal, watch it, and call today.

Read the guide →
 Local Notes · 6 min read

Moving Into a Bremerton Home: The Day-One Appliance Checklist

Navy orders, lease turnovers and summer closings keep Bremerton and Tracyton homes changing hands. The appliances usually stay behind, and nobody tells you their history. Here is what to test on the first day, how to sort out landlord and tenant responsibility, and how to book a visit around a moving date.

Read the guide →
 Troubleshooting · 6 min read

Dishwasher Not Draining in Kitsap County: Safe Checks Before You Call

Standing water after the cycle usually means a blocked sump, a kinked or unlooped drain hose, a clogged air gap, or a disposal knockout that was never removed. Work through the safe checks in order, with notes for well-water homes around Manchester, and know when the pump needs a meter.

Read the guide →
 Troubleshooting · 6 min read

Washer Shaking or Walking During Spin: Causes and Fixes in Kitsap

A washer that bangs the wall or walks across the floor during spin in Tracyton is usually a leveling, shipping bolt, or load problem, and sometimes worn suspension or a bearing. Here is how to tell which, what to fix yourself, and when the noise means a technician visit.

Read the guide →
 Troubleshooting · 5 min read

Ice Maker Not Making Ice: What to Check in a Kitsap Home

An ice maker that goes quiet is usually stopped by something simple: a raised bail arm, a clogged filter, a frozen fill tube or a tired inlet valve. In Port Orchard homes on well water, sediment adds its own problems. Here is how to work through the causes and when to call.

Read the guide →
 Buying Guide · 6 min read

Repair or Replace? A Bremerton Homeowner's Guide to the Decision

The repair-or-replace question comes up on nearly every service call from Bremerton to Port Orchard. Age matters, but the type of failure matters more. This guide lays out the factors, explains why a sealed-system fault is different from a mechanical one, and ends with a checklist to run before anyone opens the fridge.

Read the guide →

All guides →

Quick ones

Fair Questions

What are your hours?

We are open seven days a week, 8 AM to 7 PM, Monday through Sunday. Saturdays and Sundays are regular working days with the same technicians and the same process. If you call outside those hours, leave a message or send the form and we will call back when the phone opens at 8.

Can you come out today?

Often, yes. Calls that come in before early afternoon usually get a same-day visit somewhere on the route. Later calls get the first opening the next morning, agreed with you before hanging up. We never promise same-day blindly. We tell you what the schedule looks like right now and book from there.

Where do you go?

Six towns: Bremerton, Silverdale, Port Orchard, Poulsbo, Tracyton, and Manchester. The shop is on Ivy Road in East Bremerton, and the whole map is a compact loop from there. If your address sits just outside those towns, call anyway and we will tell you plainly whether it fits the route.

Which brands do you repair?

All the major brands: Whirlpool, LG, Samsung, GE, Maytag, Kenmore, Frigidaire, KitchenAid, Amana, Bosch, Electrolux, Hotpoint, Speed Queen, Roper, Admiral, Inglis, and Estate. Many share parts and platforms, so a technician who knows one knows the rest. If your brand is not listed, ask.

Is the work under warranty?

Yes. Every completed repair carries a parts-and-labor warranty, and the terms are printed on your invoice so there is nothing to look up later. If the same fault comes back inside the warranty period, call and we return under it. Keep the invoice; it is the only paperwork you need.

How does pricing work?

You get one written price after the on-site diagnosis, not before. The technician measures the machine, writes down what failed, then puts the complete repair price on paper. You approve it before any part is installed. The same approach applies to every address on the map, any day of the week.

Machine down? We're open today.

Call (360) 717-8985 or send the form. Seven days a week, 8 AM to 7 PM, and usually the same day when you call before early afternoon.