Stove, Range & Oven Repair
in Manchester, WA

Oven not heating, burner clicking without lighting, or a range flashing an error code? Bremerton Rabbit Appliance repairs electric and gas ranges and wall ovens in Manchester seven days a week, with same-day visits for early calls.

✓ Open 7 days — Manchester visits run on planned routes✓ Same-day visits when you call early✓ One written price after diagnosis, approved by you

Get a Visit on the Books

Tell us what the machine is doing. We call back with a window and get you on today's route when the clock allows.

$20 OFF code HOP20 rides along with this request — it comes off any completed repair.

We diagnose first, then hand you one written price. Nothing is installed until you approve it.

7 days a week, 8 AM – 7 PM• Same-day visits when you call early• Written price after diagnosis, approved by you• Warranty on parts and labor, on the invoice

Whirlpool, GE and Frigidaire freestanding ranges fill most of the kitchens we visit in Manchester, with Samsung and LG models in the newer builds and remodels, and KitchenAid or Bosch wall ovens and cooktops in the view houses along Beach Drive. Electric is the rule, since the village has no natural gas main in most areas; gas ranges here run on propane from a tank out back. Each brand has its own habits. GE bake elements, Whirlpool and Frigidaire control boards, Samsung door latches and the glow-bar igniters in propane ranges each show up on the Manchester route often enough that we keep them on the van.

Ovens here are asked to do real work. Canning in late summer, roasting venison through the fall, and holiday meals for a houseful mean the bake element, temperature sensor and control board get a workout. Salt air does not help either, slowly corroding the terminal connections behind the range and the spark electrodes on a cooktop. Ranges in daylight-basement kitchens and in older cottages can also be on aging circuits, where a weak connection at the receptacle makes a healthy oven look faulty. We test at the terminal block before blaming the appliance.

A range visit starts with the symptom you describe and a meter. Elements, sensors, igniters, switches, relays and boards are tested in a sensible order, and you get a written finding with one price before any part is installed. Because Manchester is a planned route, the technician brings the parts those common brands need so the repair usually finishes in one trip. We service the appliance only. Gas piping, propane regulators at the tank and house wiring stay with the plumber, the propane supplier and the electrician, and we will say so clearly if a fault lies there.

Range and oven control panel being checked during a service call
Oven controls going through their paces — locked panels after self-clean are a regular call.
What we hear from Manchester

Common Oven & Range Problems in Manchester

Oven will not heat but the burners work

On an electric range this is nearly always the bake element, which fails open or burns through with a visible blister, or the control relay that feeds it. On a propane range it is usually the glow-bar igniter, which weakens with age until it no longer opens the gas valve. Both are tested in minutes with a meter and replaced from the van. We also check the temperature sensor so the new element is controlled properly.

Burner clicks and clicks but never lights

Constant clicking on a propane cooktop means the spark module is working but the burner is not catching. The cause is often a wet or corroded electrode, a clogged burner port, or a cap that is not seated. Salt air near the water corrodes electrodes faster. If a single burner clicks even when it is off, a switch has failed. We clean, test and replace as needed and check the flame pattern before leaving.

Oven temperature is off and bakes unevenly

Cakes that sink, cookies that burn on one side and roasts that take forever point to a drifting temperature sensor, a bake element that is partly failed, a convection fan that has stopped, or a door that no longer seals. We measure the actual oven temperature against the setting, test the sensor and element, and check the gasket and hinges. The finding tells you what is worth fixing on your particular range.

Error code on the display, or the panel is dead

F-codes and a blank display are the electronic side of the range. Common causes are a failed control board, a stuck keypad, a relay board, or a loose connection at the terminal block behind the range. Power surges after a storm outage, which Manchester sees on its share of winter nights, can take out a board. We decode the error, test the board inputs and outputs, and give you a written price for the fix.

Door will not latch, lock or open after self-clean

A door stuck locked after a self-clean cycle is a lock motor or switch that did not reset, often on Samsung, Whirlpool and GE ranges. A door that will not close fully has worn hinges or a broken spring, which also lets heat escape and throws off baking. We release the lock safely, replace the motor or hinges, and advise on whether self-clean is worth the strain on an older oven.

From the routes

On the Job Across Kitsap

Meters first, opinions second. The crew doing what a visit actually pays for: measured diagnosis at the machine.

Range and oven control panel being checked during a service call
Oven controls going through their paces — locked panels after self-clean are a regular call.
Technician testing a French-door refrigerator with a multimeter
Refrigerator call — readings before any part gets named.
Technician metering an electric dryer in a garage laundry area
Garage-laundry dryer, meter on the heater circuit.
Spray arm and filter area inside a built-in dishwasher
Inside a built-in dishwasher — spray arm off, filter out, checking what the owner never sees.
Front-load dryer on a pedestal next to the matching washer
Pedestal laundry pair waiting its turn — tight quarters, standard work.
Open built-in dishwasher with racks visible during a door and latch inspection
Door, latch and rack inspection on a kitchen built-in.
Dishwasher control panel showing a diagnostic readout
Panel readout mid-diagnostic — the machine tells its side of the story.
Stainless dishwasher in a kitchen before service
A kitchen stop — stainless front, wood floor, dog supervising off-frame.
Local angle

What's different about oven and range repair in Manchester

Propane is the biggest difference. Much of Manchester has no natural gas main, so gas ranges and cooktops here run on propane delivered to a tank. The appliance side is the same for us, but the conversion matters: a range converted from natural gas needs the right orifices and regulator setting, and a mistake shows up as yellow flames, soot or weak burners. We check that on every propane range call. The second difference is the long drive and the heavy use ovens get during canning and hunting season, so we stock elements, igniters and sensors for the common brands before heading out Mile Hill. The third is salt air, which quietly works on electrodes and terminals near the water.

How a Manchester visit runs: you call or send the form; we come back with a window (today, when the clock allows). At the machine we measure before we name a part, write down the finding, and give you one price. You approve it, then we fix it — usually in the same visit from van stock. Parts and labor are warrantied on the invoice.
Fair questions

Oven & Range Repair in Manchester: Asked Often

We have a propane range. Is that something you service?

Yes. We repair propane ranges and cooktops on the appliance side: igniters, valves, electrodes, switches, sensors and boards. We do not run or modify the gas line, change the tank regulator or test the house piping. If a fault turns out to be supply pressure from the tank, we tell you and you call your propane company. If it is the range, we fix it from the van.

The oven died the week before Thanksgiving. Can you get here fast?

This is the call we hear most in November. Reach us in the morning or by early afternoon and a same-day visit to Manchester is usual, any day of the week. Have the model number from the label on the door frame or the drawer ready, since that lets us put the right element, igniter or board on the van before we leave Ivy Road.

My GE oven is forty years old and still mostly works. Can you still get parts?

Often, yes. Older GE, Hotpoint, Whirlpool and Frigidaire ranges used elements, switches and thermostats that are still available or have direct replacements. The technician checks availability on site and puts the finding and price in writing. If a part is no longer made, we say so plainly and talk through the options. We do not pressure anyone toward replacement.

Can you install a new range if I buy one, and take the old one?

Our work is repair. For a plain swap of an electric range into an existing outlet we can sometimes help as part of a service visit, but we do not run new circuits, connect gas lines or haul away appliances. Ask when you call and we will tell you what is possible for your situation and what belongs to a retailer's delivery crew.

Is it the oven or the house wiring when the breaker trips?

Either can do it. A bake element shorted to its housing or a failed relay will trip a sound breaker, and a tired breaker or a loose connection at the range receptacle will trip under normal load. We test the range with a meter and look at the terminal block connection. If the fault is in the panel or the wiring, we point you to an electrician and put that in writing.

Also in Manchester

Other Machines We Repair in Manchester

Dryer Repair in Manchester

Long vent runs through crawl spaces and damp marine air make Manchester dryers work harder than they should. We handle no-heat, long-cycle, no-start and noisy drum calls on electric and gas dryers, clear the vent at the machine, and replace heating elements, thermal fuses, belts and rollers from van stock. Same-day when you call early, seven days a week.

Washer Repair in Manchester

Washers on well water see sediment in the inlet screens and pressure drops when the pump cycles, which shows up as fill errors, slow cycles and leaks. We repair top-load and front-load machines from Whirlpool, LG, Samsung, Maytag, Speed Queen and others, with a written finding and one approved price before any part is installed.

Refrigerator & Freezer Repair in Manchester

Kitchen refrigerators, garage second fridges and chest freezers stocked with salmon and venison all get the same attention. Warm fridge, frosted-over freezer, loud compressor, water on the floor or a unit that will not start in a cold garage: we diagnose it with a meter and fix most of it in one visit, any day of the week.

Ice Maker Repair in Manchester

Well water and ice makers are a difficult pair. Sediment clogs the inlet valve, minerals cloud the cubes and pressure swings leave trays half filled. We service built-in refrigerator ice makers and freestanding units, replacing valves, modules, fill tubes and filters so the bin stays full through salmon season and summer guests.

Dishwasher Repair in Manchester

Grit on the glasses, water left in the bottom, a door that leaks onto the floor or a cycle that never finishes. We repair Bosch, KitchenAid, Whirlpool, GE, Samsung and other dishwashers in Manchester homes, with attention to well-water deposits in spray arms and to drains that feed a septic system rather than a sewer.

Stove, Range & Oven Repair elsewhere on the map: Bremerton · Silverdale · Port Orchard · Poulsbo · Tracyton · all of Kitsap
From the notebook

Read Next

 Troubleshooting · 6 min read

Oven Not Heating in Bremerton: What to Check Before You Call

An oven that lights up but never gets hot usually comes down to the bake element, a weak gas igniter, the temperature sensor, or a fuse tripped by self-clean. Here is how Bremerton homeowners can narrow it down without tools, and where it becomes a meter job.

Read the guide →
 Troubleshooting · 6 min read

Gas Range Burner Won't Light: What Kitsap Homeowners Can Check

A gas burner that clicks without lighting is usually wet, dirty, or reassembled crooked. This guide covers the safe checks, the spark module and switches, propane versus natural gas around Poulsbo and the north end, and the gas-safety lines no homeowner should cross.

Read the guide →
 Troubleshooting · 6 min read

Oven Temperature Running Hot or Cold: A Kitsap Troubleshooting Guide

Burnt bottoms and underdone centers often trace back to oven temperature. Learn how an oven cycles, how to run a thermometer test, when the calibration offset is the right fix, and when a drifting sensor, convection fan, or leaking door gasket means a Port Orchard service call.

Read the guide →
 McCormick Woods, Port Orchard

The McCormick Woods Wall Oven Locked After Self-Clean

A built-in electric wall oven in a McCormick Woods home ran self-clean the evening before a dinner, then refused to unlock or heat. The latch motor had stalled and the thermal fuse behind the control had opened from the heat.

Read the case →
 Manchester

The Manchester Chest Freezer That Went Silent

A chest freezer in a Manchester garage, packed with a season of salmon, went quiet on a Saturday morning and clicked every few minutes. A same-day visit settled the question that mattered: a failed start relay, not a dead compressor. The fish never thawed.

Read the case →

Oven & Range down in Manchester?

Call (360) 717-8985 for stove, range and oven repair in Manchester. Electric or propane, seven days a week, with the parts on the van.