Dishwasher Repair
in Bremerton, WA
Dishwasher leaking, not draining or leaving dishes dirty in Bremerton? Rabbit Appliance is based on Ivy Rd in East Bremerton and repairs dishwashers across the city 7 days a week, with same-day visits when you call before early afternoon.
Cross the Manette Bridge, head up Wheaton Way, or follow Kitsap Way out toward the lake, and the dishwashers you find were mostly added to kitchens that were not built for them. The 1940s houses near the shipyard and the ramblers of Sheridan Park got their first dishwasher during a remodel decades after the house went up, and the installs show it: a unit wedged into a cabinet opening that is slightly too small, a drain line looped under the sink in a way that works until it does not, and a water connection redone each time the machine was swapped. We see those installs every week.
The machines themselves range widely. Rentals in Union Hill, Haddon and near Olympic College usually have a basic Frigidaire, Whirlpool or GE dishwasher that gets swapped when it dies and repaired rarely in between. Remodeled kitchens in Manette and Illahee and the newer townhomes along the waterfront lean toward KitchenAid, Bosch, Samsung and LG with stainless tubs and quiet pumps. Navy households sometimes bring a dishwasher along, which is unusual but happens. The common failures are the same across brands: drain pumps, inlet valves, door latches, spray arms, heating elements and the control boards that run them.
A dishwasher visit in Bremerton begins under the sink, because the drain hose, the air gap or high loop, and the water shutoff cause a surprising share of what looks like machine failure. Then the technician runs the dishwasher and tests the pump, valve, float, latch, element and control with a meter. You get a written finding and one written price before any part is installed. The van carries pumps, valves, latches and spray arms for the common brands, so most Bremerton dishwasher repairs finish in one visit. Plumbing beyond the dishwasher's own connections is not something we do, and we tell you when the fix is there.

Common Dishwasher Problems in Bremerton
A leak that shows up after a cycle is usually a worn door gasket, a cracked spray arm throwing water at the door, a failed pump seal, or a drain hose connection under the sink that has worked loose. In older Bremerton kitchens where the dishwasher sits crooked in its opening, the door seal never closes evenly. We find where the water is coming from before replacing anything, and level the unit if needed.
Poor washing in Bremerton is most often a clogged filter or chopper, a spray arm with blocked holes, a circulation pump that has lost pressure, or water that is not getting hot enough because the heating element has failed. On older rental units a worn wash impeller does the same. We clean and inspect the wash system, test the element, and confirm the water temperature during a cycle rather than guessing from the plates.
A dishwasher that lights up but will not run, or blinks a pattern of lights, is usually a door latch that is not registering closed, a control that has stored a fault, or a thermal fuse that opened. Bosch and KitchenAid units in the newer Illahee and waterfront kitchens show codes on the display; older rentals just blink. The technician reads the code or the pattern, tests the latch and fuse, and goes from there.
If you hear the drain pump run and then silence, the inlet valve may have failed, the float may be stuck up by debris, or the water shutoff under the sink was closed during some other repair and never reopened. In Bremerton rentals the shutoff is a frequent culprit after a sink or faucet job. We check the supply first, then test the valve and float, and replace the part that is actually stopping the fill.
A detergent pod that is still in the dispenser after the cycle means the dispenser door did not open, the spray arm was blocked by a tall dish or pan, or the water never got hot enough to dissolve it. On some units the dispenser solenoid or its wax motor has failed. We test the dispenser, check the spray arm travel and the water temperature, and tell you whether it is a part or a loading problem.
On the Job Across Kitsap
Meters first, opinions second. The crew doing what a visit actually pays for: measured diagnosis at the machine.
What's different about dishwasher repair in Bremerton
Dishwashers in Bremerton inherit their problems from the kitchen around them. In the wartime houses near the shipyard and the mid-century ramblers along Wheaton Way, the dishwasher was a retrofit, and the opening, the drain routing and the water connection were improvised by whoever did the remodel. That means units that rock in the cabinet, door seals that never close evenly and drain hoses that siphon. Rental turnover adds hard use and infrequent cleaning, so filters and spray arms clog. And the moving pattern shows up here too: a dishwasher reconnected by a tenant or a mover with the drain hose low and no high loop will backfill with sink water. We check the install before we blame the machine.
Dishwasher Repair in Bremerton: Asked Often
We rent in Union Hill and the dishwasher is leaking. Who should call you?
Either you or the landlord, depending on your lease. A leaking dishwasher should not wait, because water under a cabinet in an older Bremerton house does damage fast, so turn off the water shutoff under the sink and stop using it until we come. We will diagnose with you present and send the written finding and price to whoever is paying, and the repair starts once that person approves.
Our 1940s kitchen has the dishwasher drain just looped under the sink, no air gap. Is that something you fix?
We can tell you whether the drain routing is causing the problem, and we will reroute the dishwasher's own drain hose into a proper high loop if that is the fix. Installing an air gap in the sink deck or changing the sink plumbing is plumbing work beyond the appliance connection, which we do not do. If that is what the kitchen needs, we will say so clearly and you can bring in a plumber.
Is it the dishwasher or the garbage disposal that is backing up?
Often the disposal. If the dishwasher drains into a disposal that is clogged, or into a new disposal where the knockout plug was never removed, water backs up into the dishwasher and looks like a drain failure. The technician checks the drain path first, and if the problem is the disposal or the sink drain we will tell you rather than replace a pump that is working fine.
Do you work on Bosch dishwashers in Bremerton?
Yes. Bosch units are common in the remodeled kitchens in Manette and Illahee and in the newer waterfront townhomes, and we repair them along with every other major brand. Bosch dishwashers have their own layout and fault codes, and the technician reads those codes at the start of the visit. Pumps, valves and latches for the common Bosch models are parts we try to keep on the van.
Can you come to Rolling Hills on a weekend?
Yes. We work Saturdays and Sundays with the same hours as the rest of the week, and Rolling Hills is a short drive north from Ivy Rd. A weekend call before early afternoon usually gets a same-day visit. If you call later in the day, we book the first opening the next morning. The warranty on parts and labor is the same on a weekend visit, with the terms printed on the invoice.
Other Machines We Repair in Bremerton
Dryer Repair in Bremerton
Bremerton dryer calls usually start with cycles that keep getting longer. Long vent runs through crawl spaces and damp basements fill with lint faster than owners expect, and the dryer suffers for it. We check airflow first, then test the element, thermostats and fuse with a meter, and carry the common parts for Whirlpool, Kenmore, Maytag, LG and Samsung on the van.
Washer Repair in Bremerton
Garage and basement laundries across Bremerton put washers on cold, uneven concrete, and the machines show it: walking on spin, standing water, sour front-loaders, lid locks that give up. We repair top-load and front-load washers from every major brand, including the Speed Queens that arrive with Navy transfers, and test the drain pump, valves and control before anything is replaced.
Refrigerator & Freezer Repair in Bremerton
A refrigerator that stops cooling is the one call we try hardest to fit in the same day, because food in a Bremerton kitchen does not wait. We work on top-freezer rentals in Union Hill, French-door units in Illahee, and the second fridge in the garage in Sheridan Park, and we see a lot of units that stopped cooling the week after a move.
Stove, Range & Oven Repair in Bremerton
Electric ranges dominate Bremerton kitchens, from original coil-top units in 1950s ramblers to glass tops in newer townhomes, with gas ranges in some of the newer builds. We repair both, including elements, igniters, sensors, door locks and control boards, and we tell you plainly when a problem is in the house wiring or gas line rather than the range.
Ice Maker Repair in Bremerton
Ice makers in Bremerton quit for a short list of reasons: a frozen fill tube, a stuck valve, a worn module, a fridge that was moved and never leveled again. We repair the ice maker in your refrigerator or freezer, whatever the brand, and the built-in undercounter units in a few waterfront kitchens, and we explain what is worth fixing and what is not.
Read Next
Dishwasher Not Cleaning Dishes in Bremerton: Where to Look First
Dishes coming out gritty or filmy after a full cycle? Start with the spray arms and the filter, then check water temperature, detergent dosing for soft Kitsap water, and loading. This guide for Bremerton and Silverdale homes explains which fixes are yours and which need a technician.
Read the guide →Dishwasher Not Draining in Kitsap County: Safe Checks Before You Call
Standing water after the cycle usually means a blocked sump, a kinked or unlooped drain hose, a clogged air gap, or a disposal knockout that was never removed. Work through the safe checks in order, with notes for well-water homes around Manchester, and know when the pump needs a meter.
Read the guide →Dryer Not Heating in Bremerton: What to Check First
A dryer that tumbles but never warms up is one of the most common calls we take in Bremerton. The cause is usually a blocked vent, a blown thermal fuse, or a failed element, and the order you check them matters. Here is what to look at safely before you call.
Read the guide →The Poulsbo Dishwasher That Would Not Drain on a Sunday
A dishwasher above Liberty Bay held an inch of dirty water on a Sunday morning with company due that evening. A same-day weekend visit found broken glass packed into the sump and a drain hose lying flat under the sink.
Read the case →The Manette Dryer That Heated Just Fine
An electric dryer in a 1940s Manette house took three cycles to dry a load. The element checked good, yet the drum air stayed lukewarm. A long crawl-space vent and a scorched plug explained what the meter could not.
Read the case →Dishwasher down in Bremerton?
For dishwasher repair in Bremerton, call Rabbit Appliance at (360) 717-8985 any day of the week. We are based a few minutes away on Ivy Rd.






