Ice Maker Repair
in Port Orchard, WA
Rabbit Appliance repairs fridge ice makers and freestanding ice machines across Port Orchard, 7 days a week. Most calls before early afternoon get a same-day visit, and we start with the water supply before touching the ice maker.
Well water is the first thing we ask about on a Port Orchard ice maker call. Inside the city limits most homes are on municipal supply, but around Long Lake, Sunnyslope, Mullenix and the rural stretches off Sedgwick and Bethel, a lot of houses draw from private wells, and well water carries sediment and minerals that an ice maker is poorly equipped to handle. The fill valve screen clogs, the water filter loads up early, the fill tube scales and freezes, and the result is small cubes, hollow cubes, no cubes or a bin that fills with water instead of ice.
The ice makers themselves are mostly the ones built into refrigerators. Samsung and LG French-door fridges in the newer plats and McCormick Woods have in-door ice makers that are sensitive to door seal, temperature and a frozen fill tube. GE, Whirlpool, Kenmore and Frigidaire units in the ramblers from Annapolis to Retsil use the older module-style maker that either works or has a worn-out motor and thermostat. We also see freestanding and under-counter ice machines in a few of the premium kitchens near the golf course, and those have their own pumps, sensors and cleaning needs.
The visit runs in order. The technician checks water pressure and flow to the fridge, inspects the filter and the inlet screen, looks at the fill tube for ice or scale and tests the valve with a meter. Only then do we look at the ice maker module, the ejector, the thermostat or the control that drives it. A written finding and one written price come before any part is installed. The common valves, filters and ice maker assemblies ride in the van, so most Port Orchard ice maker calls finish on the first visit.

Common Ice Maker Problems in Port Orchard
Start with the simple things: is the arm or paddle in the on position, is the freezer cold enough, is the water line turned on. After that it is usually a frozen fill tube, a failed inlet valve or a dead ice maker module. On well homes in outer Port Orchard a clogged inlet screen is as likely as anything. The technician tests supply first and the module second, so the fix matches the real cause.
Small or hollow cubes mean the tray is not filling completely. That points to low water flow from a clogged filter, a partly blocked valve, or a screen packed with sediment. Cloudy ice is often just mineral content in well water, but combined with small cubes it tells us the supply is the problem. Cleaning the screen and replacing the filter is frequently the whole repair.
A valve that no longer closes fully lets water dribble into the tray between cycles, so cubes freeze together or the bin becomes a slab. A fill tube that has cracked or a maker that is tilted can do the same. We test the valve for leak-through with the power off, check the tube and the mounting, and replace the valve from van stock if it is the fault.
Bad-tasting ice usually traces to an overdue water filter, a freezer with strong-smelling food stored uncovered, or a fridge that has been off and allowed the supply line to sit. On well water, minerals and sulfur can carry into the ice if the filter is spent. We replace the filter, flush the line, and check that the bin and maker are clean. A new filter solves most of these.
The Samsung and LG in-door makers common in newer Port Orchard kitchens live in a small compartment that depends on a good seal and steady cold air. A warped flap, a leaking gasket or a failed fan lets moisture in, and the compartment ices over until the maker jams. We thaw it properly, find the air leak or failed part and fix the cause, not just the ice.
On the Job Across Kitsap
Meters first, opinions second. The crew doing what a visit actually pays for: measured diagnosis at the machine.
What's different about ice maker repair in Port Orchard
No other appliance on our list is as sensitive to water quality as an ice maker, and Port Orchard has more homes on private wells than most of our service map. Sediment, iron and hardness from well water hit the inlet screen, the filter and the narrow fill tube long before they bother a washer or a dishwasher, so ice maker complaints from Long Lake, Mullenix and the rural edges tend to be supply problems in disguise. Our technicians treat the water path as part of the repair and clear or replace it first. On the municipal side, the newer French-door fridges in McCormick Woods and off Sedgwick bring the in-door ice maker problems: icing, flap and fan failures and control issues. Both kinds get the same meter-first, written-price approach, 7 days a week.
Ice Maker Repair in Port Orchard: Asked Often
We are on a well near Mullenix. Will an ice maker ever work right for us?
It can, with the right setup. A good inline filter ahead of the fridge, changed on schedule, keeps most sediment out of the valve and fill tube. Our technician will check what is in the line now, clean the inlet screen and tell you plainly whether the water needs treatment beyond what the fridge filter can handle. Many Port Orchard well homes run ice makers for years once the filtration matches the water.
The fridge is making ice but it is slow. Is that a repair?
Slow ice usually means the freezer is not cold enough, the fill is weak or the maker is cycling less often than it should. A worn door gasket, a frosted evaporator or a half-clogged filter can each cause it. The technician measures freezer temperature, fill volume and cycle time, and the written finding will say whether a part is needed or a filter change and a gasket clean will restore it.
Can you repair the under-counter ice machine in our McCormick Woods kitchen?
Yes. Freestanding and under-counter ice machines from the major brands are part of our ice maker work in Port Orchard. They have their own water pumps, evaporator plates, sensors and drain systems, and they need periodic cleaning to keep producing. We diagnose the pump, the harvest cycle and the water circuit, give you a written price, and bring the common parts so the repair can usually be done on the first visit.
I replaced the water filter and the ice maker still does not fill. What now?
The next suspects are the inlet valve and the fill tube. A valve can fail electrically, which the technician checks with a meter, or mechanically with a screen packed with sediment, which is common on well homes. A fill tube frozen solid will block flow even with a new filter. We check all three in order and quote the one that has actually failed, rather than swapping the whole ice maker on a guess.
Do you come out to the rural parts of Port Orchard on weekends?
Yes. Long Lake, Mullenix, Sunnyslope and the outer roads are on our map 7 days a week, Saturdays and Sundays included. Weekend calls before early afternoon usually get a same-day visit; later calls get the next morning. Longer driveways and gates are fine, just mention them when you call. Have the fridge model number and a description of what the ice looks like, or does not, and we will bring the right parts.
Other Machines We Repair in Port Orchard
Dryer Repair in Port Orchard
Dryers in Port Orchard fight damp air for half the year, and a long vent run through a crawl space or up an exterior wall slows them down further. We repair heating elements, gas igniters, thermal fuses, drum rollers and belts, and we check the vent path on every visit, because a new element will fail again behind a blocked duct.
Washer Repair in Port Orchard
From stacked units in Bay Street cottages to big front-loaders in McCormick Woods, we fix washers that will not drain, will not spin, leak, shake or stop mid-cycle. On well-water homes around Long Lake and Mullenix we pay attention to inlet screens and valves, where sediment causes slow fills and false error codes.
Refrigerator & Freezer Repair in Port Orchard
Warm fridge, frozen-over evaporator, a compressor that runs without stopping, water pooling under the crisper drawers. We diagnose cooling systems, defrost circuits, fans and control boards on everything from a basic top-freezer in a Retsil rambler to a counter-depth French door in a Sedgwick subdivision, and we handle garage freezers too.
Stove, Range & Oven Repair in Port Orchard
Electric ranges that heat unevenly, bake elements that have gone dark, gas burners that click without lighting, wall ovens that throw a fault code and lock the door. We repair stoves, ranges and ovens across Port Orchard, including the built-in and slide-in units common in newer homes near the golf course.
Dishwasher Repair in Port Orchard
Cloudy glasses, standing water in the bottom, a door that leaks on the floor, a cycle that never finishes. We repair dishwasher pumps, drain systems, inlet valves, heaters and control boards, including the panel-front models in Port Orchard's newer kitchens and the older built-ins still working hard in 1970s ramblers.
Read Next
Ice Maker Not Making Ice: What to Check in a Kitsap Home
An ice maker that goes quiet is usually stopped by something simple: a raised bail arm, a clogged filter, a frozen fill tube or a tired inlet valve. In Port Orchard homes on well water, sediment adds its own problems. Here is how to work through the causes and when to call.
Read the guide →Washer Won't Drain in Kitsap County: Safe Checks Before You Call
A washer full of standing water in Port Orchard usually comes down to a clogged pump filter, a sock in the impeller, a drain hose at the wrong height, or a lid lock that will not engage. Here is how to check each one safely, drain the tub by hand, and know when to call.
Read the guide →Oven Temperature Running Hot or Cold: A Kitsap Troubleshooting Guide
Burnt bottoms and underdone centers often trace back to oven temperature. Learn how an oven cycles, how to run a thermometer test, when the calibration offset is the right fix, and when a drifting sensor, convection fan, or leaking door gasket means a Port Orchard service call.
Read the guide →The Tracyton In-Door Ice Maker That Went Quiet
An in-door ice maker on a French-door refrigerator in a Tracyton waterfront house simply stopped, no noise and no puddle. The fill tube had frozen solid because the inlet valve passed only a trickle, and the trickle froze before it reached the mold.
Read the case →The McCormick Woods Wall Oven Locked After Self-Clean
A built-in electric wall oven in a McCormick Woods home ran self-clean the evening before a dinner, then refused to unlock or heat. The latch motor had stalled and the thermal fuse behind the control had opened from the heat.
Read the case →Ice Maker down in Port Orchard?
Ice maker quit in Port Orchard? Call (360) 717-8985. We check the water supply first, quote in writing, and come across the inlet 7 days a week, the same day when you call early.






